这是一台全自动机器，用于深拉Alu/Alu条栓剂的生产和包装。这台机器的产量约为。20000栓剂/人力资源。两条铝箔被冷成型并密封，在顶部留下一个开口。栓剂团被填充到外壳中，然后进入冷却隧道。栓剂壳的顶部密封，编码，穿孔和缺口，栓剂条垂直分离。两个铝箔卷被放置在机器的左手边和引导垂直通过成型站。栓剂外壳由适当的模具和压缩空气形成。然后，带材进入密封和填充站，在那里两半是对齐，连接和密封的基础和侧面。栓剂质量必须泵入80升容量的产品料斗，该料斗有夹套并配有搅拌器。 Fourteen filling needles fill the suppository mass into the shells, which are then transported intermittently through four cooling carousels. After the cooled and hardened suppository strip emerges from the tunnel, the top of the strip is sealed by electrically heated sealing jaws. At the same time a code, batch number, use by date etc can be embossed. Perforations are cut between the individual suppositories and a tear-notch can be cut into the suppository to facilitate opening. TECHNICAL DATA Foil Material Aluminium Duplex Foil 20 micron PP, 40 micron Alu, 20g/m2 PE Max. Roll Width 50 mm Max. Roll Diameter 490 mm Output approx. 20,000 suppositories/hr.