PSG DTS纯蒸汽发生器根据最新的CGMP FDA设计和建造。他们能够解决制药设备和生产线的任何灭菌问题。生产蒸汽的质量在热原含量、过热值和干燥分数方面是恒定的，独立于压力和生产流量。应用领域:制药、化工、化妆品、食品、饮食、医疗器械。主要特点:立即启动:采用“蓄能锅炉”技术设计，立即获得纯蒸汽。该装置能够在几秒钟内从待机状态转到满负荷状态。PSG DTS发生器的设计基于热虹吸技术。该系统由两个平行装置组成:热交换器和蒸发器/净化塔。给水进到净化塔(主体)，工业蒸汽进到换热器壳侧。工业蒸汽将给水加热到蒸发温度，在两个容器内形成强烈的循环。 The production capacity readily adapts to the variables required by users. The quality of pure steam is always excellent even by varying pressure and production capacity. The volume of water contained allows a constant pressure of pure steam even for sudden changes in the load. During the stand-by phase, energy consumption and concentrate discharge are negligible. The limited size, the accurate finish and the silent running allow the system to be inserted in the production departments. The fed water is conveyed by a pump into the evaporation chamber and into the pipe-side exchanger connected to it where it reaches the level set by the regulator. Industrial steam, or superheated water, enters the shell side exchanger bringing the water to evaporation temperature, thus establishing a strong natural circulation inside the two bodies. The vapor develops in the evaporator as a pure gas. The low evaporation rate and the height of the chamber prevent any entrainment of drops and impurities. Feeding by industrial steam or electrical energy. Simple and clean mechanical construction and extremely limited maintenance. Year: 1996 TECHNICAL DATA Pressure bar 9-15 Tank Fluid Capacity L 59 Design Temperature °C 165 Voltage Volt 380 Frequency Hz 50